Are you a professional / commercial facade cleaner and looking for a reliable self-priming cleaning agent pressure pump (acid and alkali-proof) as well as a full-fledged high-pressure cleaner for washing in one unit for continuous operation?
With this SS cleaning agent pressure pump you can permanently achieve the desired working pressure (5-110bar) and flow rate (1-12l / min) via 50m HP / LP chemical hose without pressure loss either with a connected suction hose at low pressure, using the HP / LP carbon chemical lance <9, Apply 5m (not included in delivery, optionally available from us) to the facade and / or wash off with connected fresh water at high pressure.
This SS cleaning agent pressure pump / high-pressure cleaner has a delayed automatic start-stop, that is, after 15 seconds of concentricity in the bypass, the electrical system switches the motor to total stop and maintains the working pressure so that it is immediately available again when the gun is operated again. All pump components are acid and alkali-proof, so that even the most aggressive cleaning agents (e.g. chlorine) can be sucked in continuously without wear. The high pressure pump, pressure gauge, circulation valve, all screw connections and microswitches are specially made of SS.
In principle, the set includes a SS high-pressure pump unit on a 230 volt basis with ceramic pistons, vibration-dampened, as a pure motor-pump unit for permanent installation, mounted on a SS trolley or in an aluminum cage as well as with a SS HP hose reel with a 50m HP special chemical hose.
IN THE FRAMEWORK OF THE FILTER SELECTION WE OFFER 2 OPTIONS WITH REGARD TO THE SCOPE OF DELIVERY:
The scope of delivery includes the ready-to-connect motor pump unit, e.g. for permanent installation in the vehicle with all add-on parts, but without trolley, drum and chemical hose.
The scope of delivery includes the complete set including the ready-to-connect motor pump unit with all attachments mounted on the trolley with drum and chemical hose as shown.
The scope of delivery includes the complete set, the ready-to-connect motor pump unit with all attachments, mounted in an aluminum profile cage, e.g. B. for permanent installation in the vehicle, with SS drum and chemical hose as shown and described.
The Mazzoni company existed in northern Italy in 1969 as a manufacturer of high-pressure cleaners, steam jets and individual components such as burners, high-pressure crankshaft pumps and attachments. The owner-managed family company with around 80 employees continues to produce everything by hand and only supplies top-quality components and devices in a rock-solid design for continuous industrial operation. The focus here is on quality, not profitability. The supply of spare parts and / or maintenance is guaranteed by our workshop in 65205 Wiesbaden, other dealers and German-speaking contacts at Mazzoni.
THE 3-STAGE PROCEDURE OF PROFESSIONAL / COMMERCIAL FACADE CLEANING:
Due to the nowadays mandatory insulation of the plaster facades, after some time they start to form externally organic deposits such as algae, fungi, spores and lichens.
1. First of all, the waste water collecting tray is laid out with air rims below the facade to be cleaned in order to collect the waste water that occurs. Then the cleaning agent DiSi-FRM-A or DiSi-FRM-U is applied using our low-pressure chemical pressure pump and low-pressure chemical CARBON telescopic lance using the low-pressure method <40Bar. Most of the dirty water runs off the facade, collects in the dirty water collecting tray and is sucked into a canister by our dirty water pump or flat suction mat (subject to disposal).
2. Then, after a short exposure time, the facade is washed off using the chemical pressure pump in HP operation or a more powerful high-pressure cleaner and the HP CARBON telescopic lance (9.5m or 14m). Here the 180Bar (14m TL) on the HP nozzle are only necessary to allow the telescopic lance to “fly” through the counter pressure at the cranked end of the lance. At a distance of just 1m from the facade, only about 20bars arrive directly on the facade to wash off the remains of the loosened dirt. This dirty water is also collected and pumped out (subject to disposal).
3. Finally, the long-term protection DiSi-FRM-L should be applied again with the chemical pressure pump and chemical CARBON telescopic lance (9.5m).
Since cleaning agents containing surfactants and lye have a very corrosive effect on metallic components, all cleaning components, down to the smallest screw connection, that come into contact with these cleaning agents and also the dirty water, must be made of SS stainless steel and thus permanently acid and lye-resistant.
Please observe the legal regulations for all cleaning agents.