Performance Characteristics
This is a pressure sprayer for use as a small chemical pump for the application of cleaning agents in the low pressure area in easily accessible places or for illustration on test areas in front of customers. One type of pump sprayer with a cleaning agent volume of 7 to 20 liters is offered.
Both versions are acid and alkali-proof thanks to their Viton seals. The version “industrie” 7 and 9l have the air pump on the top, while the version “titan” 12, 16 and 20l have the pump lever (for left or right handers) either left or right. The “titan” variant is also characterized by its telescopic lance (75-135cm), the transparent walls with a scale, a strong, resistant base and a highly efficient pump.
THE 3-STAGE PROCEDURE OF PROFESSIONAL / COMMERCIAL FACADE CLEANING:
Due to the nowadays mandatory insulation of the plaster facades, after some time they begin to form externally organic deposits such as algae, fungi, spores and lichens.
1. First of all, the waste water collecting tray is laid out with air rims below the facade to be cleaned in order to collect the waste water that occurs. Then the cleaning agent DiSi-FRM-A or DiSi-FRM-U is applied using our low-pressure chemical pressure pump and low-pressure chemical CARBON telescopic lance using the low-pressure method <40Bar. Most of the dirty water runs off the facade, collects in the dirty water collecting tray and is sucked into a canister by our chemical suction pump or flat suction mat (subject to disposal).
2. Then, after a short exposure time, the facade is washed off using the chemical pressure pump in HD operation or a more powerful high-pressure cleaner and the HD CARBON telescopic lance (9.5m or 14m). Here the 180Bar (14m TL) on the HP nozzle are only necessary to allow the telescopic lance to “fly” through the counter pressure at the cranked end of the lance. At a distance of just 1m from the facade, only about 30bars arrive directly on the facade to wash off the remnants of the loosened dirt. This dirty water is also collected and pumped out (subject to disposal).
3. Finally, it is best to apply the long-term protection DiSi-FRM-L again with the chemical pressure pump and chemical CARBON telescopic lance (9.5m).
Since cleaning agents containing surfactants and lye have a very corrosive effect on metallic components, all cleaning components, down to the smallest screw connection, that come into contact with these cleaning agents and also the dirty water, must be made of VA stainless steel and thus permanently acid and lye-resistant.
Please observe the legal regulations for all cleaning agents.
