This is a petrol high-pressure cleaner with an industrial 4-stroke 13HP engine, flanged to a Mazzoni crankshaft pump with full ceramic pistons, external circulation valve, gas-free speed regulation and electric start by means of an oil bath transmission gear.
To start the machine, all you need to do is press the key, which means you don’t have to pull the cable. The 12V battery is firmly screwed to the VA trolley and is continuously charged during operation.
The crankshaft pump provides either 170 bar working pressure at 20l/min or 250bar working pressure at 15l/min, depending on the spray. A gas-free speed regulation is also installed, which is controlled by hydraulics via the bypass of the external circulation valve. If the user lets go of the-pressure gun, the motor speed is reduced to idle speed. The blue rotary knob of the circulation valve is used for stepless regulation of the working pressure and flow rate. In addition, safety devices such as a pressure relief valve and a temperature safety valve are installed and the motor also has a low-oil safety device.
This machine is designed for continuous operation in continuous, power-independent use, almost perfected for professional stone and facade cleaning. All wear and spare parts are available at any time.
WITHIN THE FRAMEWORK OF THE FILTER SELECTION WE OFFER 4 OPTIONS IN RELATION TO THE SCOPE OF DELIVERY / SCOPE OF FUNCTIONS:
The scope of delivery includes the complete set including the ready-to-connect motor pump unit with all add-on parts mounted on the VA trolley with VA drum and 20m high-pressure hose and spray set as shown.
The scope of delivery includes the complete set including the ready-to-connect motor pump unit with all add-on parts mounted in an aluminum profile cage for permanent installation in the vehicle, with 1x VA drum fixable with 50m 3/4 ”water supply hose and 1x VA drum fixable with 50m DN10-HD -Hose and spray set as shown and described.
Option 3 or 4:
The scope of delivery includes the complete set including the ready-to-connect motor pump unit with all add-on parts mounted in an aluminum profile cage for permanent installation in the vehicle 1x VA drum can be fixed with 20m or 50m DN10 high-pressure hose (depending on the filter selection) and spray set as shown and described .
The Mazzoni company has existed in Northern Italy since 1969 as a manufacturer of high-pressure cleaners, steam jets and individual components such as burners, high-pressure crankshaft pumps and attachments. The owner-managed family company with around 80 employees continues to produce everything by hand and only supplies top-quality components and devices in a rock-solid design for continuous industrial operation. The focus here is on quality, not profitability. The supply of spare parts and / or maintenance is guaranteed by our workshop in 65205 Wiesbaden, other dealers and German-speaking contacts at Mazzoni.
THE 3-STAGE PROCEDURE OF PROFESSIONAL / COMMERCIAL FACADE CLEANING:
Due to the nowadays mandatory insulation of the plaster facades, after some time they start to form externally organic deposits such as algae, fungi, spores and lichens.
1. First of all, the waste water collecting tray is laid out with air rims below the facade to be cleaned in order to collect the waste water that occurs. Then the cleaning agent DiSi-FRM-A or DiSi-FRM-U is applied using our low-pressure chemical pressure pump and low-pressure chemical CARBON telescopic lance using the low-pressure method <40Bar. Most of the dirty water runs off the facade, collects in the dirty water collecting tray and is sucked into a canister by our dirty water pump or flat suction mat (subject to disposal).
2. Then, after a short exposure time, the facade is washed off using the chemical pressure pump in HP operation or a more powerful high-pressure cleaner and the HP CARBON telescopic lance (9.5m or 14m). Here the 180Bar (14m TL) on the HP nozzle are only necessary to allow the telescopic lance to “fly” through the counter pressure at the cranked end of the lance. At a distance of just 1m from the facade, only about 20bars arrive directly on the facade to wash off the remains of the loosened dirt. This dirty water is also collected and pumped out (subject to disposal).
3. Finally, the long-term protection DiSi-FRM-L should be applied again with the chemical pressure pump and chemical CARBON telescopic lance (9.5m).
Since cleaning agents containing surfactants and lye have a very corrosive effect on metallic components, all cleaning components, down to the smallest screw connection, that come into contact with these cleaning agents and also the dirty water, must be made of SS stainless steel and thus permanently acid and lye-resistant.
Please observe the legal regulations for all cleaning agents.