Performance Characteristics
Your solar or photovoltaic system loses up to 30% of its performance due to environmental influences and corresponding deposits (depending on the environment). With continuous cleaning you increase this performance again and thus your income!
The professional solar systems or photovoltaic washing brush module has 3 rotating nylon brush heads, each 20cm wide, giving a cleaning width of approx. 55cm.
The high torque rotation is generated by the flow rate of the high-pressure cleaner, by means of a gear unit and drive nozzles (analogous to iSolar ©, Kärcher). The working pressure of the high-pressure cleaner used is reduced to a counter pressure of only 30-40bar by the individually matched internal drive nozzles of the photovoltaic washing brush module. Due to our construction, we can also adjust the 3 individual washing brushes satisfactorily for very small HPW >8l / min flow rates. The washing brush module is equipped with an HP articulated joint for comfortable vertical handling. This enables the brush module to be used on PV systems of any roof pitch. The lance holder above the brush module, with its center of gravity, prevents it from tipping, so that it always lies flat and is easy to control. The 3 nylon brush attachments are subject to little wear and tear and can be exchanged very easily. An exchange set (3 pieces) is optionally available at any time for 99 euros.
MATCHING YOUR HIGH PRESSURE CLEANER NECESSARY:
We deliver all accessory products such as functional lances, surface cleaners etc. ready for connection with connection adapters e.g. M21 (Wap), M22 + Quick Connect + Easylock (Kärcher), quick-release fasteners for Nilfisk, Mazzoni etc.) and configured with the appropriate nozzle size for your high-pressure cleaner. For this purpose, after ordering, we need the relevant information from you with regard to the manufacturer and type designation, alternatively flow rate and working pressure.
